Academic Qualifications
- Doctor of Philosophy in Mechanical Engineering, University of Moratuwa, Sri Lanka, (2018)
- Master of Engineering in Energy Technology, University of Moratuwa, Sri Lanka, (2005)
- B.Sc. Engineering (Hons.) in Mechanical Engineering, University of Moratuwa, Sri Lanka, (1998)
- Certificate in Teaching in Higher Education, Staff Development Centre, University of Colombo (2018)
- A teacher in higher education accredited by the Staff and Educational Development Association (SEDA), United Kingdom (2018)
Professional Qualifications and Affiliations
- Member of the Sri Lanka Association for Improving Higher Education Effectiveness (SLAIHEE)
- Associate Member of the Institution of Engineers, Sri Lanka
- Member of the Sri Lanka Association for the Advancement of Science
- Life member of the Japan International Cooperation Agency (JICA) Alumni Association of Sri Lanka
1. Publications as Theses/Dissertations
- R M P S Bandara, Optimizing energy performance and indoor environmental quality of buildings using energy simulation, generic optimization and computational fluid dynamics, PhD Thesis, Department of Mechanical Engineering, University of Moratuwa, June 2018
- R M P S Bandara, Modelling of Combustion in a Single-burner Biogas-Fired Cooking Stove, Master’s Thesis, Department of Mechanical Engineering, University of Moratuwa, February 2005
R M P S Bandara, Improved Biomass Cook-stove Dissemination in Sri Lanka, Special study report submitted in partial fulfilment of the requirements for the Postgraduate Diploma in Energy Technology, Department of Mechanical Engineering, University of Moratuwa, December 2000
2. Publications in Refereed Journals
W. C. D. K. Fernando & R. M. P. S. Bandara (2022). Reading as a learning strategy for engineering undergraduates,
Innovations in Education and Teaching International 59(2), pp. 183–192.
https://doi.org/10.1080/14703297.2020.1835687R. M. P. S. Bandara, W. C. D. K. Fernando & R. A. Attalage (2021). Modelling of aerosol trajectories in a mechanically-ventilated study room using computational fluid dynamics in light of the COVID-19 pandemic,
International Journal of Simulation and Process Modelling 17(4), pp. 250–262.
https://www.inderscienceonline.com/doi/abs/10.1504/IJSPM.2021.122504- R M P S Bandara & R A Attalage (2020). Use of energy modelling for promoting energy performance in buildings, SLEMA Journal 23(1), pp. 10-13, Sri Lanka Energy Managers Association
http://doi.org/10.4038/slemaj.v23i1.20 - R M P S Bandara & R A Attalage (2015). Promoting building energy efficiency through performance-based standards: Is it a challenge?, Sri Lanka Energy Empowered Nation – Research Findings, 1(1), pp. 30-33, Ministry of Power and Renewable Energy.
- R M P S Bandara & R A Attalage, Optimization of building performance in terms of envelope elements through combined energy modelling and generic optimization”, Applied Mechanics and Materials Vols. 592-594 (2014), Trans Tech Publications, Switzerland.
http://www.scientific.net/AMM.592-594.2447
3. Papers in International Conference Proceedings (Peer Reviewed)
- F B Y R De Silva, R M P S Bandara & R A Attalage, Performance analysis of a photovoltaic system under different configurations, Proceedings of the 14th Kotelawala Defence University International Research Conference on Security, Stability and National Development in the New Normal, Colombo, 9-10 September 2021, pp. 44-49.
- S A A A K Athukorala, R M P S Bandara & M S R De Soyza, Analysis of the potential use of the anaerobic digester to treat the food waste at KDU cadets’ mess, Proceedings of the 14th Kotelawala Defence University International Research Conference on Security, Stability and National Development in the New Normal, Colombo, 9-10 September 2021, pp. 181-185.
- H R B Alahakoon, J S Balasooriya, J A M O Jayasooriya, R M P S Bandara, M P Rathnayake & S A A A K Athukorala ,Remote controllable multi weapon mounting sentry platform (“SEKHMET 19”), Abstracts of the 13th Kotelawala Defence University International Research Conference on Holistic Approach to National Growth and Security, Colombo, 15-16 October 2020, p. 34.
- W K V Gunasekara, Fa Farmis, K A K Gayantha, R M P S Bandara, S A A A K Athukorala & M P Rathnayake, Controlling parked vehicle interior temperature using renewable energy, Proceedings of the 13th Kotelawala Defence University International Research Conference on Holistic Approach to National Growth and Security, Colombo, 15-16 October 2020, pp. 212-216
- F B Y Randana de Silva, R M P S Bandara and Sampath Abegunasekara, Performance assessment of downdraft biomass gasifier, Abstracts of the 10th International Conference on Structural Engineering and Construction Management (ICSECM), Kandy, 12-14 December 2019, p. 97.
- H A J C L Perera, N A K Arachchi, B L D Fernando, D T A N S Senevirathne & R M P S Bandara, Design and fabrication of a low-cost model log splitting machine, Abstracts of the 7th International Conference of Sabaragamuwa University of Sri Lanka (ICSUSL), Belihuloya, Sri Lanka, November 2019, p. 13.
- K K S P Upasena, U I Weerathunga, J I Abeygoonewardena & R M P S Bandara, Design of a new aircraft wing inspired by the magnificent frigate bird, Abstracts of the 12th Kotelawala Defence University International Research Conference on Challenges to Humankind in the Face of New Technologies, Colombo, 11-12 September 2019, p. 51
- P B Henadeera, M G M R Malagoda, S L M D Rangajeewa & R M P S Bandara, Aerodynamic analysis of a vertical axis wind turbine, Abstracts of the 5th International Conference on Multidisciplinary Approaches on Sustainable Development through Multidisciplinary Research, Faculty of Graduate Studies, University of Sri Jayewardenepura, Sri Lanka, August 2018, p. 18
- R M P S Bandara, R A Attalage & W C D K Fernando, Optimizing life cycle cost of buildings through simulation-based optimization: A case study. Proceedings of the 6th Annual International Conference on Architecture and Civil Engineering (ACE 2018), Singapore, May 2018, pp. 361-368
- T G D Peiris, R M P S Bandara & F B Y R De Silva, Portable, economical cooler by using micro-structural heat transfer properties of terracotta, Abstracts of the 10th KDU International Research Conference on Changing Dynamics in the Global Environment: Challenges and Opportunities, General Sir John Kotelawala Defence University, Sri Lanka, August 2017, p. 50
- R M P S Bandara V Nimarshana & R A Attalage, Predicting thermal comfort in an office building using energy simulation and computational fluid dynamics, Proceedings of the International Conference on Computational Modelling and Simulation 2017 (ICCMS2017) Colombo, Sri Lanka, May 2017, pp. 194-197
- R M P S Bandara & R A Attalage, Prediction of Indoor Environmental Quality of an Office Building using Computational Fluid Dynamics, Abstracts of the 3rd Asia Conference of the International Building Performance Simulation Association (Asim2016), Jeju, South Korea, November 2016, p. 22.
- R M P S Bandara & R A Attalage, Promoting Building Energy Efficiency through Performance-based Standards: Is it a Challenge?, Abstracts of the Asia Clean Energy Forum 2016, Manila, Philippines, June 2016, p. 47
- R M P S Bandara & R A Attalage, Application of the coupled energy simulation and computational fluid dynamics approach for predicting energy performance of buildings, Abstracts of the Peradeniya University International Research Sessions 2015 (iPURSE – 2015), Peradeniya, November 2015, p. 102
- H A M Peiris, P V S Nirmal, H M H H S Bandara, D M Mahindarathne, S L M D Rangajeeva & R M P S Bandara, Aerodynamics Analysis of F-16 Aircraft, Proceedings of the 8th KDU International Research Conference on Inculcating Professionalism for National Development, General Sir John Kotelawala Defence University, Sri Lanka, August 2015, pp. 69-74
- J I Abeygoonewardena & R M P S Bandara, Airplane Performance Analysis through CFD Results: Assessment of a NACA64A212 Wing-body Combination, Proceedings of the 7th KDU International Research Conference on Expanding Development Horizons through Education, Research and Innovation, General Sir John Kotelawala Defence University, Sri Lanka, August 2014, pp. 150-154
- R M P S Bandara & J I Abeygoonewardena, Assessment of Aerodynamics of the NACA 64A212 Airfoil on the Context of Computational Fluid Dynamics, Proceedings of the 6th KDU International Research Conference on Sri Lanka as a Hub in Asia: The Way Forward, General Sir John Kotelawala Defence University, Sri Lanka, August 2013, pp. 273-278
- R M P S Bandara & N S Rathnayaka, Modelling of Conventional Swing of the Cricket Ball using Computational Fluid Dynamics, Proceedings of the 5th KDU International Symposium on Ensuring National Security Through Reconciliation & Sustainable Development, General Sir John Kotelawala Defence University, Sri Lanka, August 2012, pp. 447-457
- R P Kumanayake & R M P S Bandara, Building Information Modelling (BIM): How it Improves Building Performance, Proceedings of the 5th KDU International Symposium on Ensuring National Security Through Reconciliation & Sustainable Development, General Sir John Kotelawala Defence University, Sri Lanka, August 2012, pp. 357-365
- R M P S Bandara & R P Kumanayake, Investigation of the Instantaneous Thermal Efficiency of a Flat Plate Solar Collector, Abstracts of the 2nd International Symposium on Modelling the Issues and Challenges towards Sustainable Development, Sabaragamuwa University of Sri Lanka, Belihuloya, July 2008, p. 194
- W M S R Weerasinghe & R M P S Bandara, Computational Modelling of a Wood-fired Semi-enclosed Cooking Stove, Electronic Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Victoria Falls, Zambia, June 2003, WW1
4. Papers in National/Local Conference Proceedings (Peer Reviewed)
- W C D K Fernando & R M P S Bandara, Perception of students in adapting to online learning during COVID-19, Proceedings of the 17th Annual Conference on Higher Education in Sri Lanka organized by the Sri Lanka Association for Improving Higher Education Effectiveness (SLAIHEE), held online via Zoom platform, July 2021, pp. 12-17.
- R M P S Bandara & W C D K Fernando, Positive perceptions and improved engineering undergraduate course design following a staff development session on constructive alignment, Proceedings of the 16th Annual Conference on Higher Education in Sri Lanka organized by the Sri Lanka Association for Improving Higher Education Effectiveness (SLAIHEE) online via Zoom platform, July 2020, pp. 37-42.
- R M P S Bandara & M P Rathnayake, Enhancing aerodynamic performance of an armoured personnel carrier using computational fluid dynamics, Abstracts of the 75th Annual Sessions of the Sri Lanka Association for the Advancement of Science, Colombo, December 2019, p. 53.
- S D Withanage, H M H Senarathne, T D G Ekanayaka, F B Y R De Silva & R M P S Bandara, Analysis of the power output in a concentrated photovoltaic system under different operational conditions in Sri Lanka, Abstracts of the 75th Annual Sessions of the Sri Lanka Association for the Advancement of Science, Colombo, December 2019, p. 51.
- F B Y R De Silva, R A Attalage, R M P S Bandara & D D Ananda Namal, Develop a mathematical model (probabilistic neural network) to identify the standard sky classification and distribution of sky luminance in Sri Lanka, Abstracts of the 75th Annual Sessions of the Sri Lanka Association for the Advancement of Science, Colombo, December 2019, p. 54.
- R M P S Bandara, P H V Nimarshana & R A Attalage, Numerical and experimental investigation of indoor environmental quality of a lecture hall in a Sri Lankan university, Transactions (Part B) of the 113th Annual Sessions of the Institution of Engineers, Sri Lanka, Colombo, October 2019, pp. 601 – 608.
- R M P S Bandara & W C D K Fernando, Use of divergent assessment method to assess computational modelling competencies of engineering undergraduates, Proceedings of the 15th Annual Conference on Higher Education in Sri Lanka jointly organized by the Staff Development Centre, University of Moratuwa and Sri Lanka Association for Improving Higher Education Effectiveness (SLAIHEE), Colombo, July 2019, pp. 1-4.
- R G S K Rajapaksha, K D P C Kurukulasooriya, H M T M Herath, S L M D Rangajeeva & R M P S Bandara, Aerodynamic analysis of rear wings and rear spoilers of passenger automobiles, Transactions (Part B) of the 112th Annual Sessions of the Institution of Engineers, Sri Lanka, Colombo, October 2018, pp. 515-522.
- R M P S Bandara & W C D K Fernando, Use of group work to promote design competencies of Mechanical Engineering undergraduates, Proceedings of the 14th Annual conference organized by the Sri Lanka Association for Improving Higher Education Effectiveness (SLAIHEE), Colombo, July 2018, pp. 1-5.
- R M P S Bandara, V Nimarshana, R A Attalage & W C D K Fernando, Predicting Indoor Air Quality and Thermal Comfort using Energy Simulation and Computational Fluid Dynamics, Abstracts of the 73rd Annual Sessions of the Sri Lanka Association for the Advancement of Science: Abstracts Part I, Colombo, December 2017, p. 51
- R P Kumanayake, H B Luo & R M P S Bandara, A conceptual tool for assessing building life cycle carbon emissions in the context of Sri Lanka, Transactions (Part B) of the 111th Annual Sessions of the Institution of Engineers, Sri Lanka, Colombo, October 2017, pp. 507-515
- R M P S Bandara, R A Attalage & W C D K Fernando, Making realistic predictions on building energy performance through coupled energy simulation and computational fluid dynamics, Proceedings of the Vidulka National Energy Symposium 2015, Colombo, November 2015, pp. 124-140
- R M P S Bandara, R A Attalage & M Vignarajah, Prediction of energy performance of an office building through combined energy simulation and computational fluid dynamics, Transactions (Part B) of the 109th Annual Sessions of the Institution of Engineers, Sri Lanka, Colombo, October 2015, pp. 201-208
- R M P S Bandara & R A Attalage, Optimization of life cycle cost of buildings in terms of envelope elements through combined performance modelling and generic optimization, Proceedings of the Vidulka National Energy Symposium 2014, Colombo, November 2014, pp. 115-124
- R M P S Bandara & R A Attalage, Optimization Methodologies for Building Performance Modelling and Optimization, Proceedings of the 18th Annual Research Symposium, National Engineering Conference – Engineering Research for Nation Building, Engineering Research Unit, Faculty of Engineering, University of Moratuwa, February 2013, pp. 32-37
- R M P S Bandara, R P Kumanayake & J K Kanthi, Energy Performance Analysis of the Cafeteria Building of a Sri Lankan University through Energy Modelling, Transactions (Part B) of the 105th Annual Sessions of the Institution of Engineers, Sri Lanka, Colombo, October 2011, pp. 272-280
- R M P S Bandara, R P Kumanayake & S P A R S Jayathilake, A study to examine the possibility to upgrade the National System to eliminate the issues related to the Trade Testing conducted by the Government Technical & Vocational Education and Training (TVET) sector of Sri Lanka, Abstracts of the 1st TVET Research Convention on Research for Sustainable Reforms in Vocational Training, Colombo, April 2005, p. 32
- D D Wijesinghe, R M P S Bandara, R P Kumanayake et al, A study to evaluate the contribution of the Government Technical & Vocational Education and Training (TVET) institutions in Sri Lanka for accomplishing the training requirements and upgrading occupational areas in the industrial sector, Abstracts of the 1st TVET Research Convention on Research for Sustainable Reforms in Vocational Training, Colombo, April 2005, p. 9
- W M S R Weerasinghe & R M P S Bandara, Computational Modelling of Cook-Stoves, Abstracts of the 8th Annual Symposium on Research for Industry, Engineering Research Unit, University of Moratuwa, Sri Lanka, August 2002, pp. C3-4
5. Publications in other forms (Books/Materials for Supplementary Reading)
- “Learning Management System” published by the University of Vocational Technology (2009)
- “Instructional Design and e-Learning” published by the University of Vocational Technology (2008)
- Member of the panel of authors in developing “Vocational Education and Training Plan for Food & Beverages Industry” published by the Tertiary and Vocational Education Commission (2007)
6. Scientific and Literary Communications
- R M P S Bandara (2022). Challenges of teaching and learning in higher education via online in light of the COVID-19 pandemic, Newsletter of the Sri Lanka Association for Improving Higher Education Effectiveness, Volume 1, July 2022, pp. 3-4.
- R M P S Bandara & W C D K Fernando (2022). Workshop on Constructive Alignment, Newsletter of the Sri Lanka Association for Improving Higher Education Effectiveness, Volume 1, July 2022, p. 8.
- R M P S Bandara, W C D K Fernando & R A Attalage (2021). How safe are we against COVID-19 in air-conditioned buildings?, The Official E-Newsletter of the Institution of Engineers Sri Lanka, Issue 58, September 2021.
- R M P S Bandara & R A Attalage (2020). Enhancing energy performance of buildings: The energy modelling approach, The Official E-Newsletter of the Institution of Engineers Sri Lanka, Issue 48, October 2020.
- R M P S Bandara & R A Attalage (2020). Building energy standards/codes: Present status and way forward for Sri Lanka, The Official E-Newsletter of the Institution of Engineers Sri Lanka, Issue 46, January 2020.
